Questions and Answers

Nissan 300-ZX Keyless Entry Q. Hi there. My name is Chris, and I own 1995 Nissan 300-ZX. How do I program a factory keyless entry remote? Thank you very much, Chris

A. Okay, here's what you have to do:

1. Open the rear hatch.
2. Close and lock all doors.
3. Insert and remove the ignition key more than six times within 10 seconds. This will erase any original ID codes from the remote control unit.
4. Manually unlock and lock the driver's side door once using the inside lock lever.
5. Press the door lock button on the remote controller one time. This enters the remote controller ID into the remote control unit.
6. Complete ID enter mode by opening the driver's side door. This cancels the ID enter/ programming mode.