By Alvie Rodgers C.E.T.

Figure 1

1. Remove the steering wheel nut. Figure 2. (1)
2. Remove the spring clip with remover. Figure 2. (2)
3. Unplug the horn connector. Figure 2. (3)
4. Snap the horn cover off by pulling upwards. Figure 2. (4)

Figure 2

5. Remove the steering wheel with a steering wheel puller. Do not use a hammer to bang on the end of the shaft.

Figure 3

7. Push in and turn counterclockwise to remove horn wire. Figure 4. (1)
8. With the steering wheel removed, lift off the horn continuous connection mechanism and turn signal canceling arm. Figure 4. (2)

Figure 4

Back ����� Next
Start