Questions and Answers

BMW 325es Brake Bleeding Q. I need to know how to bleed my brakes 1984 BMW 325es?

A. Here is the procedure:

1. Remove brake master cylinder cap. Fill master cylinder reservoir to maximum level. Replace reservoir cap.
2. Have a helper pump the brake pedal slowly 3 or more times (12 or more times for vehicles with ABS). Hold the pedal down on the last stroke.

TORQUE: 7mm bleeder valves to 31 to 44 in lb
TORQUE: 9mm bleeder valves to 35 to 53 in lb

3. Loosen right rear bleeder valve ½ turn. When brake fluid stops flowing, close bleeder valve.
4. Repeat step 3 until brake fluid flows clear and without air.
5. Repeat steps 1 thru 4 and bleed remaining brakes in the following order. Left rear, right front, and left front.
6. Remove brake master cylinder cap. Properly fill brake master cylinder reservoir. Install cap.

NOTE: On vehicles equipped with anti-lock brake systems (ABS), pump brake pedal at least 12 times before opening bleeder valve.