Auto Repair

  1. Home
  2. Autos
  3. Auto Repair

Questions and Answers

Dodge 2500 DTC 27, 32, 37 And 45

Q. Hi, I was hoping that you could help me in this matter. I have a 1995 Dodge Magnum 2500 cargo van with a 5.2 liter multi port injector engine and I have a few codes on the computer. I tried to cross reference all the codes and I keep getting different answers from different books and automotive people. The codes that I am getting are code 45, 37, 32 and 27. I would appreciate if you could tell me straight up what the codes are.

Thanks for your time,
Kevin

Dodge 2500 DTC 27, 32, 37 And 45

A. Here are the codes as described in the Chrysler service manual.

27 Injector #1 control circuit. Injector output driver does not respond properly to the control signal.

32 EGR system failure. An open or shorted condition detected in the EGR solenoid.

37 TCC unlock solenoid. An open or shorted condition detected in the torque converter part throttle unlock solenoid circuit (automatic transmission).

45 Overdrive solenoid. An open or shorted condition detected in overdrive solenoid circuit.

I would check Maxi-Fuse #7, 30 amp. I think you'll find it is blown.

Additional Information provided courtesy of ALLDATA

Back to Index
© 2003 Vincent T. Ciulla

About.com Special Features

Auto Repair

  1. Home
  2. Autos
  3. Auto Repair