Questions and Answers
Toyota Pick-up Clutch
Q. I have a 1986 Toyota Pickup 4x4. My question is regarding removal and installation of the clutch. Are there any web sites you could recommend or previous question's in your archived folders pertaining to this situation. Is this a job for an advanced mechanic who I probably couldn't afford, or do you think reading up on the procedures is enough to do the job?
Thank you in advance for your time,
Adrian...A. Whether you should or shouldn't depends on your level of expertise and what you feel comfortable with. This is not a job for a beginner. You must replace: pilot bearing, throwout bearing, clutch disc and pressure plate, you need a special tool to replace the pilot bearing. You should have the flywheel resurfaced to eliminate any chattering when you're done. Check the clutch slave cylinder and master cylinder for leakage and replace if leaking. At the least get quality parts from your dealer.
The Toyota transmission and transfer case are very heavy, don't even think about removing it by yourself. You must remove both shifters, starter motor and both drive shafts before you even think about removing the transmission.
Your best bet if you don't have the special tools needed would be to see if there's a local truck club or 4x4 club in your area and appeal to them for help. Maybe get some experienced friends together and have a "clutch party", guarantee them food and beer when they're done! You could also try talking to a tech at a local dealer and see if any of the guys do work on the side.
Good Luck!
Additional Information provided courtesy of ALLDATA
