1. Home
  2. Autos
  3. Auto Repair

Questions and Answers

Nissan SE Truck Dies When In Gear

Q. I have a 1995 Nissan SE 4x4 3.0 liter V-6 and I am having a little trouble with the transmission. The trouble I'm having is that after the truck sits for several hours then when I get in and start it and put in gear it wants to die. What it feels like to me is that it goes into full gear and kills the motor.

Nissan SE Truck Dies When In Gear

When I finally take off it feels as though it is in drive completely instead of upshifting. After I drive it for a few minutes it starts operating perfect. Could this be some kind of solenoid? No other problems with transmission other than that.I would appreciate any information you can give me.

Thank you,
Albert

A. It is most likely a stuck Torque Converter Clutch (TCC) Solenoid. Not uncommon for a Nissan. You can test it easily enough by just unplugging it. Or you can check the resistance across the terminals. The specified resistance is 10 to 16 ohms.

Nissan SE Truck Dies When In Gear

To get to it you will need to drop the transmission pan and remove the transmission filter. Might as well replace the transmission filter while you're at it.

Nissan SE Truck Dies When In Gear

Additional Information provided courtesy of AllDATA

Back to Index
© 2005 Vincent T. Ciulla
About.com Special Features

How to Inspect a Used Car

Stay safe and save time by following these tips before driving a used car. More >

New and Redesigned Cars for 2010

Discover the hottest cars for the 2010 calendar year. More >