1. Home
  2. Autos
  3. Auto Repair

Questions and Answers

Ford Taurus DTCs 332, 335 and 336

Q. Hi, My car is 1995 Ford Taurus GL 3.0 liter V-6, automatic transmission,105500 km. A few days ago, the Check Engine lamp ON when I was driving. But it would be off when I switch off the car and start it again, but it probably on again a while after driving. I went to a repair garage this morning. They told me the related check code after they checked the car used a measure equipment. The code is:

Ford Taurus DTCs 332, 335 and 336
  • "332 EGR VALVE NOT OPEN"
  • "335 EGR SIGNAL OUT OF RANGE"
  • "336 EXH PRESS HIGH OR EGR SIGNAL HIGH"

I am very worry about my car. So could you tell me how would I do ? Is it a serious or small problem?

Thanks!
William

A. These three codes in combination would make me think the EGR valve is bad, the EGR passages are clogged up or there is a large leak in the exhaust system.

So I would pull off the EGR valve and, with a hand vacuum pump, make sure it is working properly. Also check and clean the EGR passage.

Ford Taurus DTCs 332, 335 and 336

Additional Information provided courtesy of AllDATA

Back to Index
© 2003-2004 Vincent T. Ciulla
About.com Special Features

How to Inspect a Used Car

Stay safe and save time by following these tips before driving a used car. More >

New and Redesigned Cars for 2010

Discover the hottest cars for the 2010 calendar year. More >