Questions and Answers

Replacing Dodge Durango T/S Bulbs Q. I'm trying to determine how to remove the passenger front turn signal housing, so I can replace one of the bad bulbs. I see no visible screws to take out. 1998 Dodge Durango 5.2 liter V-8 Automatic transmission 122,000 miles Fuel Injection ABS brakes P/S, A/C, Cruise control Rack and pinion steering Thanks, Lindsay

A. Here you go Lindsay!

REMOVAL

1. Remove torx screw attaching park lamp to head lamp module.
2. Pull the park and turn signal lamp outward and separate from head lamp module.

3. Remove park and turn signal sockets from back of lamp.
4. Remove side marker socket from back of lamp.
5. Separate park and turn signal lamp from vehicle.

INSTALLATION

1. Install side marker socket in back of lamp.
2. Install park and turn signal sockets in back of lamp.
3. Using the guides on the bottom and side of the head lamp module, align the park and turn signal lamp under head lamp module.
4. Slide the park and turn signal lamp inward under head lamp module. Push firmly until the lamp is seated.
5. Install screw attaching park lamp to head lamp module.

For the bulb itself:

REMOVAL

1. Remove park and turn signal lamp.
2. Rotate bulb socket ¼ turn counterclockwise and pull turn signal lamp socket from back of lamp.
3. Pull park and turn signal lamp bulb from socket.

INSTALLATION

1. Install park and turn signal lamp bulb in socket.
2. Install park and turn signal lamp socket into back of lamp.
3. Install park/turn signal lamp.