Questions and Answers

Chrysler 300M Door Panel Removal Q. Hi, How can I remove the left door panel? 2000 Chrysler 300M. Window does not work. Thanks, Gene

A. I don't have a picture of a Chrysler 300M door panel, but this is one of a Chrysler Concorde which is similar.

1. Remove speaker flag.
2. Remove speaker grille by inserting trim tool at the rear of the grille and disengaging clips holding to trim panel. Remove grille
3. Remove trim plug from the remote bezel by inserting a small flat blade tool into the notch and remove, if equipped.
4. Remove three screws from bottom of door.
5. Remove screw in pull cup.
6. 6 Remove screw in remote bezel.
7. Remove two screws in the instrument panel interface area.
8. Remove three screws in the speaker area.
9. Using a trim tool, disengage the retainer clips from the door trim panel to the door panel.
10. Raise trim panel up to disengage from the belt being careful to hold the panel securely
11. Disconnect the linkage from the remote handle assembly.
12. Disconnect the power mirror switch.
13. Disconnect the power door lock switch wire connector.
14. Disconnect the power window switch wire connector.
15. Disconnect the radio speaker wire connector.
16. Disconnect wiring harness clips from trim panel.
17. Disconnect the courtesy lamp.
18. Remove trim panel from vehicle.

CAUTION: Do not pry on door trim panel, damage to trim panel will result.