1. Autos
Send to a Friend via Email

Your suggestion is on its way!

An email with a link to:

http://autorepair.about.com/library/a/1d/bl555d.htm

was emailed to:

Thanks for sharing About.com with others!

Questions and Answers

Town & Country Air Filter

Q. I'm trying to change my air filter on my 2000 Chrysler Town & Country Van 3.8 liter engine. I take the two screws off and disconect the two hoses and than the small hose and take it out but theres no way to open the box with the filter inside? I looked for clips but there arent any and tried prying it open with a screw drive but no good. What I do?

Thanks,
Stephen

A. Here's what you have to so Stephen:

Chrysler Town & Country Air Filter
Air Filter Housing Location

REMOVAL:
  1. Remove 2 screws and air inlet resonator (Fig. 1).
  2. Loosen 3 clamps holding air cleaner housing halves together.
  3. Remove left side of air cleaner housing (Fig. 2).
  4. Remove element from air cleaner housing (Fig. 3).
INSTALLATION:
  1. Install a new element in housing.
  2. Position left side of housing.
  3. Snap clamps into place.
  4. Install hoses and air inlet resonator.

Chrysler Town & Country Air Filter
Air Inlet Resonator

Chrysler Town & Country Air Filter
Air Cleaner Housing (Left Side)

Chrysler Town & Country Air Filter
Air Cleaner Element

Additional Information provided courtesy of ALLDATA

Back to Index
You can opt-out at any time. Please refer to our privacy policy for contact information.

©2014 About.com. All rights reserved.